P・E-Lite

  • Office Agency

Home > About Product

About Product

BLOCK PRODUCTS

Block products are foaming object of the shape of Block made to foam to polyolefin system resin between 5 times and 30 times Thickness is from 30 mm to 100 mm.
Size is based on a 1-m square and 1 m x 2 m.
There is a product which had various hardness and a feel by selection of foaming magnification or resin.

There are an open cell type, an electric conduction type, an antibacterial type, etc. other than a common type.

BLOCK PRODUCTS

SHEET ROLL PRODUCTS

Sheet roll products are foaming object of the shape of a continuation sheet made to foam to polyolefin system resin between 10 times and 40 times.
There are an open cell type, a heat-resistant type, etc. other than a common type.。

SHEET ROLL PRODUCTS

OPEN CELL PRODUCTS

It is the type which interconnecting-cell-ized the olefin system foaming object by Special processes.
It excels in the characteristic as a sealant, because breathability is low and flexiblity is excellent according to the cellular structure.

The foaming object of an interconnecting cell object is considered that water leaks. However, by the softness, since the flexibility to a sealing surface is high and compression stress's is small, it has a function which can carry out a seal by low load.

OPEN CELL PRODUCTS

CONDUCTIVE PRODUCTS

Conductive products are adding carbon black at high concentration to polyolefin system resin. It is the independent air-bubbles foaming object which made the electrical resistance value low, and there is a product between 10 times and 30 times.

The example of a use:The packing material of IC chip
* In order that ordinary polyolefin form may show very strong electrical insulation properties, it tends to be tinged with static electricity, and is not suitable for the shock absorbing material of the electronic industry material.

CONDUCTIVE PRODUCTS

Conductive products are adding carbon black at high concentration to polyolefin system resin. It is the independent air-bubbles foaming object which made the electrical resistance value low, and there is a product between 10 times and 30 times.

The example of a use:The packing material of IC chip
* In order that ordinary polyolefin form may show very strong electrical insulation properties, it tends to be tinged with static electricity, and is not suitable for the shock absorbing material of the electronic industry material.